configure CCS and matlab2017a?

settings for CCS6.0

a F28335.ccxml file is created and loacted at the root directory of CCS6.0.

settings for matlab 2017a

  • about the c compiler

I've download the MinGW64 compiler as the software requires:

  • get Hardware support packages

the packages is configured as follows:

1


2
3
4
5

with the warning information:

I choose CCSv5 in fig. 1 because in follwing setup steps ,function checkEnvSetup will be used , and the newest version of IDE is CCSv5.

The warning information is ignored here and will be explained later.

  • checking the enviroment variables

type the following command in command window:

checkEnvSetup('ccsv5','f28335','setup')

According to the figure above, version of (Texas Instruments C2000 Code Generation Tools) is limited to 5.2.1 to 6.0.2, which is conflict with the warning information which require the version to be version 6.2.0.

  • configure the xmakefilesetup

type "xmakefilesetup" in the command window.

and is configured as follows:

1
2
3
4
5
  • simulink model
a simple simulink model

a simple test model is built above.


  • configuration parameters

the c28335.cmd and F28335.ccxml is copied and located at root directory of CCS6.0.

1
2

then to generate to CCS project of the simulink,


however, there still exists error information that I can't figure out.

编辑于 2018-08-15

文章被以下专栏收录